SUNNY ALPHONSUS OBOT

Company Overview: Client: SAIPEM CONTRACTING NIG LTD, Project: DANGOTE PETROLCHEMICAL AND OIL REFINARY COMPANY

Job Description:

• Installation Of ESD, GDS, and DCS cabinets in various rack rooms, ensure proper bolting is done earthing cables are terminated according to specification both PE/IE in all cabinets including Fire and Gas Systems (FGS) cabinets using detailed drawings and cross wiring database
• Have good knowledge on hard ware installation and integration on blending analyzer system line up system for commissioning
• Installation Filed bus module of various types such as 214b, 230, 233, 231, and many more in their cabinets respectively using general arrangement drawing (GA)
• Pulling, glanding, and termination of ICSS repeated, ICSS alarm, 24VDC, 230V and Ethernet, network cables (CAT6) lay SMF, MMF, cables in the Central control building
• Installation of TRICONEX CHASSIES in ESD, GDS system Cabinets Laying and termination of I/O bus cables, ELCO cables both on upper and lower slots in the central control building
• Pre-Commissioning and Commissioning of Process Automation system (PAS), Safety Integrated System (ICSS) and Fire and Gas System Panels with Schneider representatives
• Have good knowledge on the use of system interconnection diagram to lay system cables of various types ranging from type 1,4, 5,RS485
• Also have good knowledge in the use of cross wiring data base to perform inter cabinet wiring in various cabinets
• Install various components in cabinets such as backplane, termination assembling (TA) Hart multiplexer, relays, barriers

• Company Overview: Client: NOBLE ENERGY, Location: ASENG FPSO EQUITORIAL GUINEA MALABO
• Bending and installation of various sizes of tubing’s booth High and low pressure reengining from 1’ 3/4’’ 5/8’ 1/2' 3/8’ and many more
• Also follow up installation of valves on the various flow lines
• I also carry out hookup on high integrity pressure safety valves [hips]
• Inline with client’s requirement and specification
• I also ensure that lick test is carried out on the tubing’s to ensure that there no leakage on the tubing’s with about [13/15 bar pressure]
• Client: NOBLE ENERGY, Location: ASENG FPSO EQUITORIAL GUINEA MALABO

• Company Overview: Client: TOTAL NIGERIA LIMITED, Location: EGINA FPSO TOTAL DEEP WATERS
• Bending and installation of various sizes of tubing’s booth High and low pressure reengining from 1’ 3/4’’ 5/8’ 1/2' 3/8’ and many more
• Also follow up installation of valves on the various flow line
• I also carry out hookup on high integrity pressure safety valves [hips]
• Inline with client’s requirement and specification
• I also ensure that lick test is carried out on the tubing’s to ensure that there no leakage on the tubing’s with about [13/15 bar pressure]
• Client: TOTAL NIGERIA LIMITED, Location: EGINA FPSO TOTAL DEEP WATERS

• Company Overview: Client: SAIPEM CONTRACTING NIGERIA LIMITED, Project: SOUTHERN SWAMP ASSOCIATED GAS SOLUTION, Tunu, Bayelsa state
• Installation and wiring of components such as surge suppressors, reset relays, MCBs and AI/DI terminal blocks in Safety integrated Systems (SIS), Process Automation Systems(PAS) and Fire and Gas Systems(FGS) cabinets using detailed drawings and cross wiring database
• Installation and wiring of SLS and I/O cards in the FGS and PAS respectively
• Pulling, glanding, and termination of ICSS repeated, ICSS alarm, 24VDC, 230V and Ethernet cables in the Central control building
• Installation of VESDA systems on cabinets in the central control building
• Pre-Commissioning and Commissioning of Process Automation system(PAS), Safety Integrated System(SIS) and Fire and Gas System Panels with Emerson representatives
• Prepared daily reports on activities, including compilation of all instrument punch list items, to the Automation team Lead
• Support filed loop check activities, also carry out trouble shooting both in the field and in the rack room for smooth daily operations
• Client: SAIPEM CONTRACTING NIGERIA LIMITED, Project: SOUTHERN SWAMP ASSOCIATED GAS SOLUTION, Tunu, Bayelsa state

• Company Overview: Client: TOTAL NIGERIA LIMITED, Location: RIVERS STATE OML58 OBAGI
• Installation and termination of CCTV cameras like pan tilt and zoom weather proof outdoor[PTZ] DOOME cameras booth indoor and outdoor for security and process areas
• Installation of CCTV surveillance fixed cameras on perimeter fence and synchronizing them to intruder detection system [IDS]
• Installation and termination of access control system gadgets like electromagnetic door lock, manual alarm buzzer, manual key reels, indoor and outdoor card readers, and Tung style gate
• Power Up Loop And Function Test All Input Control And Output Components To Verify Operation As Per Design And Vendor Procedure And Specifications For Analogue Loops Check The Following As Applicable
• Transmitter Function Test And Range Visual Display Including Graphics, Annunciation And Any Generated Data Logging Alarm And Trip Points Controller Auto/Manual Changeover And Output Action
• Direct Reverse Acting Proportional, Integral, Derivative Settings Valve Operation Under Auto And Manual Control And Failure Modes For Digital Input Loops Check The Following As Applicable Primary Element Function Test, Range And Set Point Visual Delay Including Graphics, Annunciation And Any Generated Data Login Failure Mode (Burnout) Line Monitoring Mode (Open/Short Circuit) For Digital Output Loops Check The Following As Applicable Final Element Action And Failure Modes
• Client: TOTAL NIGERIA LIMITED, Location: RIVERS STATE OML58 OBAGI

• Company Overview: Client: TOTAL NIGERIA LIMITED, Location: RIVERS STATE OFFSHORE
• Loops checks on DCS/description of checks confirm loop integrity and ensure power supplies and protection are correct to design drawings
• Power up loop and function test all input control and output components to verify operation as per design and vendor procedure and specifications for analogue loops check the following as applicable
• Transmitter function test and range visual display including graphics, annunciation and any generated data logging alarm and trip points controller auto/manual changeover and output action (direct reverse acting proportional, integral, derivative settings valve operation under auto and manual control
• Client: TOTAL NIGERIA LIMITED, Location: RIVERS STATE OFFSHORE

• Company Overview: Location: USAN (FPSO) DEEPWATER HOOKUP PROJECT
• Installation of lightening fittings, fabrication FO cable trays, pulling arranging, installation and programming logic control panel, glanding and termination of cable both electrical and instrumentation
• Installation of instrument gadget such as pressure transmitter, pressure gauge, level indicating transmitter, tubing and lick testing
• Installation of load commutated inverter panel HV and LV panels, testing merging of cables, receiving punch list items and nerdifying them
• Troubleshooting load commutated inverter panel
• Location: USAN (FPSO) DEEPWATER HOOKUP PROJECT

• Company Overview: Location: OWEH, DELTA STATE
• REFURBISHMENT OF OWEH GAS PLANT
• INSTALLATION OF INSTRUMENT GADGET, FITTING OF TUBING, FABRICATION AND TERMINATION OF ELECTRIC POWER MOTOR
• Location: OWEH, DELTA STATE

• Company Overview: Location: KM 14 ABA EXPRESS ROAD, PORT HARCOURT
• Installation of lightening fittings, fabrication of cable trays, pulling arranging, glanding and termination of cable both electrical and instrumentation
• Installation of instrument gadget such as pressure transmitter, pressure gauge, level indicating transmitter, tubing and lick testing
• Installation of load commutated inverter panel HV and LV panels, testing merging of cables, receiving punch list items and modifying them
• Location: KM 14 ABA EXPRESS ROAD, PORT HARCOURT

• Company Overview: Location: BONNY ISLAND, RIVERS STATE
• Installation of lightening fittings, fabrication of cable trays, pulling arranging, glanding and termination of cable both electrical and instrumentation
• Installation of instrument gadget such as pressure transmitter, pressure gauge, level indicating transmitter, tubing and lick testing
• Installation of load commutated inverter panel HV and LV panels, testing merging of cables, receiving punch list items and nerdifying them
• Location: BONNY ISLAND, RIVERS STATE

• Company Overview: Location: BONNY ISLAND, RIVERS STATE
• Installation of lightening fittings, fabrication of cable trays, pulling arranging, glanding and termination of cable both electrical and instrumentation
• Installation of instrument gadgets such as pressure transmitter, pressure gauge, level indicating transmitters, tubing and lick testing, installation of load commutated inverter panel HV and LV panels, testing and merging of cable receiving punch list items and modifying them
• Location: BONNY ISLAND, RIVERS STATE

OPEANS SAFETY CONSULTANCY

CERTIFICATE IN BASIC OFFSHORE INSTALLATION SAFETY 2018 - 2023

AWARENESS TRANINING (T-BOSIET)

CERTIFICATE ON TUBE FITTING AND EQUIPMENT INSTALLATION

BOTH PRATICAL AND THEORETICAL [SWAGELOK]

NIGERIA ELECTRICITY MANAGEMENT SERVICES AGENCY 2018 - 2019

CERTIFICATE ON LV/HV CABLE SPLICING

COMPRESS AIR EMMAGENCY BREATHING SYSTEM CETIFICATE

[CAEBS]

OFFSHORE SAFETY PERMIT ( O.S.P )