Sophia Okaro

Similar Profiles

• Rupert A. DavisRupert A. Davis

  <ul> <li>Supervised daily operations to ensure team efficiency and productivity.</li> <li>Evaluated needs of departments and delegated tasks to optimize overall production.</li> <li>Organized client meetings to provide project updates.</li> <li>Operated forklifts to move materials and products within the warehouse.</li> <li>Assisted in inventory management by organizing stock in designated areas.</li> </ul> at Robco Service<ul> <li>Supervised daily operations to ensure team efficiency and productivity.</li> <li>Evaluated needs of departments and delegated tasks to optimize overall production.</li> <li>Organized client meetings to provide project updates.</li> <li>Operated forklifts to move materials and products within the warehouse.</li> <li>Assisted in inventory management by organizing stock in designated areas.</li> </ul> at Robco Service

• Rohit RathorRohit Rathor

  <ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group

• Sally FriersonSally Frierson

  <ul> <li>Responsible for coordinating and managing bi-weekly production schedule meetings.</li> <li>Developed production schedules to optimize workflow and resource allocation.</li> <li>Analyzed inventory levels to ensure timely material availability for production.</li> <li>Prepared reports on production status, material usage, and capacity planning needs.</li> <li>Coordinated with production teammates to determine scheduling and conflict resolutions.</li> <li>Developed and maintained production schedules to meet customer demands.</li> <li>Coordinated with other departments such as engineering, purchasing, and warehouse to ensure smooth operations.</li> <li>Compiled data on spreadsheets to devise forecasts for production planning by gathering input from production staff and leaders.</li> </ul> at Kelvion Thermal Solutions<ul> <li>Responsible for coordinating and managing bi-weekly production schedule meetings.</li> <li>Developed production schedules to optimize workflow and resource allocation.</li> <li>Analyzed inventory levels to ensure timely material availability for production.</li> <li>Prepared reports on production status, material usage, and capacity planning needs.</li> <li>Coordinated with production teammates to determine scheduling and conflict resolutions.</li> <li>Developed and maintained production schedules to meet customer demands.</li> <li>Coordinated with other departments such as engineering, purchasing, and warehouse to ensure smooth operations.</li> <li>Compiled data on spreadsheets to devise forecasts for production planning by gathering input from production staff and leaders.</li> </ul> at Kelvion Thermal Solutions

• TONY STOCKTONTONY STOCKTON

  <ul> <li>Inspected incoming shipments to verify compliance with quality standards.</li> <li>Stored goods in designated warehouse locations to optimize inventory management.</li> <li>Led customer service operations for onsite delivery and pickup.</li> <li>Picked and packed orders efficiently for timely shipment.</li> <li>Operated both standup reach lift and sit down lift equipment.</li> <li>Maintained a clean, organized work area while adhering to safety protocols.</li> </ul> at CUI<ul> <li>Inspected incoming shipments to verify compliance with quality standards.</li> <li>Stored goods in designated warehouse locations to optimize inventory management.</li> <li>Led customer service operations for onsite delivery and pickup.</li> <li>Picked and packed orders efficiently for timely shipment.</li> <li>Operated both standup reach lift and sit down lift equipment.</li> <li>Maintained a clean, organized work area while adhering to safety protocols.</li> </ul> at CUI