Rs Logic 500
Nonso Chris Okechukwu
Electrical,Instrumentation And Automation Engineer
2 Eleto Street Eliohani Rumuodara Portharcourt
Summary
Rig Electrical,Instrumentation and Automation Engineer. Multifaceted technical engineering career delivering results in plant maintenance, electrical and Automation including in the offshore oil rig operations field. Technically apt control systems engineer with 10+ years of experience in plant and rig Electrical, Electronics maintenance and industrial Automation,offshore and land rig operations. A motivated professional, with exceptional work ethics and a drive to always achieve set objectives on time and within budget. Agile leader of systems automation with team-oriented mindset, collaborating with staff from all departments to streamline productivity with technology-based solutions. Flexible producer of effective code tailored to organizational needs. Authority on technical process automation with strong base of knowledge of evolving solutions to uncharted problems.
Overview
11
11
years of professional experience
10
10
years of post-secondary education
5
5
Certifications
1
1
Language
Work History
RIG ELECTRICAL,INSTRUMENTATION,AUTOMATION ENGINEER
SPECIALTY DRILLING FLUIDS LTD
PORTHARCOURT , RIVERS STATE
2018.01 - Current
- SPECIALTY DRILLING, BR 301 SEMISUBMERSIBLE SWAMP RIG.SHELL SPDC WELLS LOCATIONS, DODO NORTH 1,2,TUNU CDRY
- Ensure daily completion of inspections and maintenance on electrical/electronic equipment
- Enforce the permit to work and isolation system within the electrical/electronic
- Responsible for my own personal safety and the safety of co-workers
- Supervise/Carry out operation and service of power generation equipment, i.e
- Generator, and Carry out periodic maintenance according to the guidelines of engine controls, SCR's, switchgears, transformers, power distribution, etc
- Supervise/Carry out maintenance, troubleshooting and repair of general rig equipment such as HVAC system, refrigeration plants, power and communication systems, etc
- Supervise/Carry out maintenance, troubleshooting and repair of electrical components of drilling equipment, i.e.PLCS, DC drilling motors and auxiliaries, Top Drive System, mud pumps, etc
- Supervise/Carry out the maintenance, troubleshooting and repair of electronic systems communication, data acquisition,plc sensors,S computers and navigational equipment
- Ensure that all installation, calibration, and modification to electronic systems and components are properly carried out
- Provide technical support, domestic and industrial electronic services to all areas of the rig
- Assist Chief Electrician with repairs and replacement of electrical equipment as and when required
- Performs general housekeeping in work areas and to machinery and equipment
- Maintains tools and equipment in a good work order and properly stored
- Ensure that reports for repair and maintenance of equipment are accurate and complete
- Assist the Maintenance Supervisor in supplying information for maintenance and repair budget
- Maintain discipline onboard and ensure compliance with Company disciplinary procedures
- Manage and update the company rig preventive maintenance system software.
- Administered both energized and de-energized testing on multi-design change packages.
- Performed in-depth electrical acceptance testing of completed hardware.
- Updated and maintained project documentation for detailed recordkeeping.
- Prepared technical documentation for operation, troubleshooting and maintenance of industrial systems.
- Supported business needs dependent on location, working with staff at all levels to produce targeted solutions.
- Supported facility and process equipment engineering and design, integration and validation.
- Mentored junior engineers and new hires in job-specific tasks and application of electrical processes.
- Evaluated electrical installations and systems to isolate faults and implement corrective actions.
- Troubleshot, fixed and improved electrical controls.
- Inspected completed installations to observe operations and verify conformance to design and equipment specifications.
- Reduced electrical construction hazards with upgraded safety policies and stringent enforcement.
- Identified specific cables, fuses and circuit breakers required for assigned installations.
- Assisted maintenance personnel with complex troubleshooting.
- Calibrated and repaired existing systems to maintain functionality.
Industrial Automation Engineering Intern
TECHNOCRAT AUTOMATION INDUSTRY
CHENNAI
2020.01 - 2020.09
- TECHNOCRAT INDUSTRIAL WATER TREATMENT PLANT
- AMBATTUR INDUSTRIAL ESTATE CHENNAI, TAMIL NADU, Monitored and troubleshoot plant Automation devices, sensors, smart actuators, solenoids and transmitters
- Configure and make PLC & HMI software modifications using Rockwell Automation Rslinx classics, Rslogix500, and Siemens step7Simatic manager and Siemens WinCC Scada
- Reads and interprets electrical circuit drawing/Blue prints to identify field devices and wiring
- Effective Maintenance of Process Automation systems to ensure downtimes are minimized/eliminated.
- Learned new skills and applied to daily tasks to improve efficiency and productivity.
- Maintained excellent attendance record, consistently arriving to work on time.
- Proved successful working within tight deadlines and fast-paced atmosphere.
- Improved operations through consistent hard work and dedication.
Plant Electrical Technician
Specialty Drilling Fluids LTD
PORTHARCOURT
2011.01 - 2017.12
- Worked in a drill cutting plant thermal desorption unit, monitored and maintained several drill cutting plant in areas of electrical and mechanical parts, including shaker to dyer transfer, tank condenser quenching
- Directed workforce to ensure achievement of production specifications in line with company requirements and quality standards
- Oversaw execution of equipment maintenance with minimal fugitive losses and chemical spills.
- Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems.
- Installed electrical conduit and wiring for power, controls and lighting.
- Tested, troubleshot and calibrated equipment in shop and field.
- Checked supportive electrical equipment such as brackets and hangers, making repairs when necessary.
- Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
- Disconnected and removed motors and pumps.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Tested wiring and other system parts for electrical flow and function.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
Electrical Technician
Marklints Industrial limited Enugu Nigeria
ENUGU
2010.01 - 2011.07
- Worked in plant maintenance department
- Monitored and maintained plant electrical system, Troubleshooting using test equipment & hand tools to diagnose locate & fix electrical problems
- Checking & testing circuit breakers and replacing them where required
- Tracing, diagnosing and rectifying electrical faults
- Carrying out electrical installation and maintenance work
- Assembles, installs, tests, and repairs motor controls of all kinds such as starters, stop and start buttons, relays, panels, circuit breakers
- Assembles, installs, tests, and repairs, all such lighting fixtures and apparatus as is used in the plant
- Install and connect all types of wiring, conduit and apparatus
- Trouble-shoot electrical controls (motor circuits, process or packaging machinery, using the required tools such as multimeter, volt-meters.
- Measured and read DMM, meggers, micrometers and thickness gauges using electrical and mechanical testing instruments.
- Installed electrical conduit and wiring for power, controls and lighting.
- Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
- Checked supportive electrical equipment such as brackets and hangers, making repairs when necessary.
- Disconnected and removed motors and pumps.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Installed electrical and mechanical equipment in accordance with National Electric Code.
- Tested wiring and other system parts for electrical flow and function.
IT Intern
GNET Communication Ltd, Abuja
ABUJA
2008.11 - 2009.11
- Collaborated to assist support protocol development and offered consultation based on cross-functional knowledge.
- Assisted IT team members by crafting project research material for implementation.
- Aided problem resolution measures and suggested patches and hardware, software and network troubleshooting alternatives.
- Researched new technologies to boost information security.
- Supported IT department in handling technology rollout and maintenance.
- Helped IT team document core systems configurations, relevant passwords, and system access requirements.
- Maintained inventory records and documentation for equipment in database.
- Worked with vendors to resolve problems with services, equipment, or inventory.
IT Intern
Suburban Telecom Ltd. Abuja
ABUJA
2006.06 - 2006.12
- Collaborated to assist support protocol development and offered consultation based on cross-functional knowledge.
- Assisted IT team members by crafting project research material for implementation.
- Aided problem resolution measures and suggested patches and hardware, software and network troubleshooting alternatives.
- Researched new technologies to boost information security.
- Supported IT department in handling technology rollout and maintenance.
- Updated firmware, pushed out files via FTP and troubleshot connectivity issues with remote monitoring equipment.
- Helped IT team document core systems configurations, relevant passwords, and system access requirements.
- Maintained inventory records and documentation for equipment in database.
- Replaced defective components and upgraded office equipment per technology plan.
- Helped department set up equipment for meetings, events and operations.
- Contributed to team environment by sitting in on meetings and brainstorming new ideas for issue resolution.
- Determined and resolved printer and networked copier outages.
Education
Post Graduate Diploma - Industrial Automation Engineering
Technocrat Institute of Automation
Chennai India 2020.01 - 2020.04
Post Graduate Diploma - Process Automation Engineering
Technocrat Institute of Automation
Chennai India 2020.06 - 2020.08
Master of Engineering - Electrical and Electronics Engineering (Communication Systems Engineering
Enugu State University of Science And Technology
Enugu,Nigeria 2015.03 - 2018.11
Bachelor of Engineering - Electrical and Electronics Engineering
Enugu State University of Science And Technology
Enugu,Nigeria 2002.01 - 2007.10
Skills
PLC, DCS, SCADA and VFD.undefined
Software
Emaint PMS
Certification
FLUKE Electrical Measurement Safety
Timeline
FLUKE Electrical Measurement Safety
2020-07
FLUKE Troubleshooting Electrical Motor and Drives
2020-07
FLUKE Digital Multimeter Basics
2020-07
ROCKWELL AUTOMATION CCP183 EtherNet/IP Configuration and Troubleshooting.
2020-07
Post Graduate Diploma - Process Automation Engineering
Technocrat Institute of Automation
2020.06 - 2020.08
Post Graduate Diploma - Industrial Automation Engineering
Technocrat Institute of Automation
2020.01 - 2020.04
Industrial Automation Engineering Intern
TECHNOCRAT AUTOMATION INDUSTRY
2020.01 - 2020.09
IACD Certified Person In-Charge Lifting, Hoisting, and Rigging ( PIC ) – 2018 IACD Certi
2018-05
RIG ELECTRICAL,INSTRUMENTATION,AUTOMATION ENGINEER
SPECIALTY DRILLING FLUIDS LTD
2018.01 - Current
Master of Engineering - Electrical and Electronics Engineering (Communication Systems Engineering
Enugu State University of Science And Technology
2015.03 - 2018.11
Plant Electrical Technician
Specialty Drilling Fluids LTD
2011.01 - 2017.12
Electrical Technician
Marklints Industrial limited Enugu Nigeria
2010.01 - 2011.07
IT Intern
GNET Communication Ltd, Abuja
2008.11 - 2009.11
IT Intern
Suburban Telecom Ltd. Abuja
2006.06 - 2006.12
Bachelor of Engineering - Electrical and Electronics Engineering
Enugu State University of Science And Technology
2002.01 - 2007.10
Similar Profiles
LoveGod EkeLoveGod Eke
Field HSSE Engineer at Specialty Drilling Fluids LimitedField HSSE Engineer at Specialty Drilling Fluids Limited
Ahmed RauofAhmed Rauof
Blending plant Productions Supervisor at Kuwait Drilling Fluids and Oil ServicesBlending plant Productions Supervisor at Kuwait Drilling Fluids and Oil Services
MICHEAL BAXTERMICHEAL BAXTER
Shop Mechanic at Valance Drilling FluidsShop Mechanic at Valance Drilling Fluids