Reliable engineering professional with experience completing range of electrical engineering projects. Hardworking, knowledgeable and dependable individual. Proven success in overseeing maintenance, inspection and system upgrade programmes.
Overview
11
11
years of professional experience
1
1
Certification
Work History
Electrical engineer
Nigeria LNG / All Energy West Africa
Bonny, Rivers State
02.2022 - Current
Supervised technicians and craftspeople during projects.
Supervised technicians in installing and maintaining MV, LV, and HV systems, overseeing safety and operational efficiency.
Calculated loads to size sizing wire and circuit protection for optimum performance and safety.
Diagnosed and rectified electrical faults, minimizing downtime and optimizing system performance.
Used advanced AutoCAD skills to develop single line diagrams for electrical power distribution networks.
Conducted risk assessments for electrical installations, maintaining safety and reliability.
Maintained strict compliance with regulatory requirements and industry standards for safe, operational environment.
Supervised, trained and mentored juniors to guarantee reliable execution of electrical engineering activities.
Developed methodologies for installing temporary and permanent electrical equipment in compliance with safety standards.
Recommended improvements in electrical design processes, enhancing overall efficiency.
Prepared and modified drawings, specs, calculations and graphs for complex electrical designs.
Assessed electrical systems performance for optimal functionality.
Created technical documentation to facilitate knowledge transfer within team.
Consulted on electrical system design and development to devise power stations.
Prepared accurate sketches and drawings for electrical schemes.
Outlined and implemented electrical installation requirements for varied equipment and industry.
Completed preventive and emergency maintenance across power systems, networks and equipment.
Monitored transmission performance, responding quickly to faults for minimised power disruption.
Designed power distribution networks to meet key system requirements.
Specified manufacturing techniques to achieve desired system requirements.
Applied innovative solutions to enhance energy efficiency in electrical systems.
Advised on system and equipment upgrade requirements to meet business output demands.
Led safety standard controls through rigorous testing and certification processes.
Optimised approaches to new projects by analysing blueprints, drawings and sketches.
Collaborated on cross-functional teams to design and implement innovative solutions, enhancing plant performance and reliability.
Performed in-depth electrical acceptance and high-potential isolation testing of completed hardware.
Developed training programs for plant personnel to cultivate highly skilled workforce.
Built highly-technical design blueprints for electrical components and accessories.
Designed smart grids and performed smart grid feasibility studies.
Kept and updated records on all electrical design changes.
Implemented preventive maintenance schedules for electrical equipment.
Executed detailed design reviews, identifying and resolving potential issues in electrical plans.
Electrical engineer
Nigeria LNG/ALCON Nigeria Ltd - U6400 ETP Project
Bonny, Rivers State
06.2018 - 02.2022
Supervised technicians and craftspeople during projects.
Supervised technicians in installing and maintaining MV, LV, and HV systems, overseeing safety and operational efficiency.
Calculated loads to size sizing wire and circuit protection for optimum performance and safety.
Diagnosed and rectified electrical faults, minimizing downtime and optimizing system performance.
Kept and updated records on all electrical design changes.
Used advanced AutoCAD skills to develop single line diagrams for electrical power distribution networks.
Reviewing and approving design drawings which includes layout drawings, load demand calculations, voltage drop and cable sizing, manufacturer drawings, single line diagrams, circuit booklets and cable schedule and ensure it is according to project specification and DEP/ standard drawing prior to Implementation.
Participation in Factory Acceptance Test of some electrical equipment and cables before and during beginning of Effluent Treatment Plant (ETP) Project.
Checking equipment specifications before quotation process to limit project flaw deliverables.
Creating electrical MTO (Material Take-off) from project drawings.
Investigating and developing work procedures for electrical installations of LV and HV on temporary construction site for NLNG
Producing TPPCR (Third Party Plant Change Request) for Tie-in to existing NLNG facilities.
Reviewing and approving electrical permit documents prior to submittal to NLNG for approval.
Writing CTQs (Construction Technical Query) for various changes and modifications on site
QA/QC engineer
Nigeria LNG/ALCON Nigeria Ltd - RA Type-3 72 Apt
Bonny, Rivers State
05.2017 - 05.2018
Performs materials receiving inspections with NLNG on all electrical project materials delivered on site and sign-off inspection reports with NLNG.
Conduct all relevant electrical performance test and prepare their quality records as applicable.
Updated relevant documentation, checking for accuracy and relevance.
Created and issued Standard Operating Procedures for team members to follow.
Improved product quality by completing company, system and compliance audits.
Collaborated with engineering team to communicate and achieve quality standards and outputs.
Insulation resistance (IR) test of high voltage cable (HV) before and after cable pulling and HI-POT test on high voltage cable after installation.
Performing of RCD, MCB and ELCB Tripping Test.
Current Transformer/Voltage Transformer Ratio Test, Flick Test.
Power Transformer (6.6kVA to 15MVA) winding test.
Lux test on Lighting Installations.
Conductivity test / Torque of Bolts to specified Tightening value (Newton Meter -NM).
Battery charge and Discharge of UPS systems and Voltage Level check.
Inspecting installation of switchgear (LV, MV & HV), Transformers, AVR, UPS and HVAC Systems
Supervised site construction personnel to gauge performance and productivity.
Prioritized conflicting requirements, meeting tight deadlines and keeping projects on-task.
Implemented policies and devices to improve workplace safety.
Monitored and assessed quality performance to gauge progress.
Directed cost-effective construction of highly specialized equipment and machinery.
Submitted performance reports, identifying shortfalls and facilitating improvement actions.
Electrical Construction Engineer
SPDC / Saipem CNL - SSAGS Project
Niger Delta, Delta
08.2015 - 01.2017
Completed duties to deliver on targets with accuracy and efficiency.
Review electrical, P & ID design drawings & other technical documents & update as required.
Handled installation of different Electric motors, Electrical Panels termination, etc.
Coordinated with Sub-Contractor (Desicon Engineering Limited) for designing, engineering and supervising during upgrading of HP pump motor control system.
Fabrication of cable trays and installation.
Installation of fire and gas detectors.
Installation of earth rod and entire earth system of plant.
Panel erection/arrangement at Electric Switch Room (ESR) and Field Auxiliary Room (FAR).
Electrical technician
SPDC / ALCON Nigeria Limited - Soku NAG K2S Projct
Soku , Rivers State
01.2014 - 06.2015
Tested wiring and other system parts to determine electrical flow and function.
Selected and used wide range of electrical tools and equipment.
Tested equipment and installations for compliance with electrical regulations.
Diagnosed equipment faults and completed minor repairs using manufacturer manuals.
Worked safely at heights to minimise risk of personal injury.
Led team to deliver efficient maintenance and installations.
Planned, prepared and installed wiring systems and associated equipment with meticulous attention to detail.
Approved electrical performance, function and safety of new installations.
Approved selected materials to maintain safety compliance.
Serviced electrical equipment in line with supervisory instructions and user manuals.
Minimised plant breakdowns by performing maintenance on electrical equipment.
Applied industrial engineering knowledge to review and repair systems.
Achieved health, safety and quality standards in hazardous environment.
Calibrated and maintained electrical equipment for optimised performance.
Carefully followed product manuals, technical specifications and design drawings in engineering work.
Built cabinets, switches and electro-mechanical assemblies.
Created circuit designs to meet operational equipment requirements.
Followed up on manufacturing and field reports to resolve outstanding problems.
Gathered parts supplies and tools in preparation for each workday or new job.
Read and interpreted blueprints, technical drawings, schematics and computer-generated reports.
Operated soldering and desoldering tools safely and responsibly.
Assembled components during technical production phases.
Coordinated engineering teams to deliver technical projects within deadlines.
Produced detailed monthly and ad-hoc reports as required.
Led technical consulting across electrical research and development projects.
Interpreted assembly drawings accurately for quality technical outcomes.
Advised technical teams on appropriate materials selection ahead of manufacturing.
Aligned and fastened components securely for optimised electrical function.
Adapted engineering designs for optimised function, performance and compliance.
Designed electrical engineering blueprints to unique project specifications.
Logged test data for enhanced pre-production analyses.
Education
Bachelor of Engineering - Electronics & Communication Engineering
Awarded Joint 2024 NLNG Mentorship Award - Partner Staff
Awarded 2023 NLNG 10 Behavioral Award on CI - Partner Staff
Awarded 2023 AEWA Outstanding Staff of the Year
Certification
NYSC Discharge Certificate.
Registered Engineer: Council for the Regulation of Engineering in Nigeria (COREN) (R62785)
Corporate Member: Nigeria Society of Engineers (NSE) (51530)
Member Nigeria Institute of Electrical Electronics Engineering (NIEEE)
Oil and Gas Management (ACCE)
Health and Safety Management (ACCE).
Health Safety and Environment (Supervisory Safety) GTD
Microsoft Office Certificate.
ISO 9001:2015 IRCA CQI Trained LEAD AUDITOR Quality Management System (QMS)
References
References available upon request.
Timeline
Master of Science - Data Science
Nigerian University of Technology and Management
10.2024 -
Electrical engineer
Nigeria LNG / All Energy West Africa
02.2022 - Current
Electrical engineer
Nigeria LNG/ALCON Nigeria Ltd - U6400 ETP Project
06.2018 - 02.2022
QA/QC engineer
Nigeria LNG/ALCON Nigeria Ltd - RA Type-3 72 Apt
05.2017 - 05.2018
Electrical Construction Engineer
SPDC / Saipem CNL - SSAGS Project
08.2015 - 01.2017
Electrical technician
SPDC / ALCON Nigeria Limited - Soku NAG K2S Projct
01.2014 - 06.2015
Bachelor of Engineering - Electronics & Communication Engineering
Kwame Nkrumah University of Science & Technology
02.2008 - 11.2011
GCSEs - Science
Demonstration Secondary School FCE (T)
09.1998 - 07.2004
NYSC Discharge Certificate.
Registered Engineer: Council for the Regulation of Engineering in Nigeria (COREN) (R62785)
Corporate Member: Nigeria Society of Engineers (NSE) (51530)
Member Nigeria Institute of Electrical Electronics Engineering (NIEEE)
Oil and Gas Management (ACCE)
Health and Safety Management (ACCE).
Health Safety and Environment (Supervisory Safety) GTD
Microsoft Office Certificate.
ISO 9001:2015 IRCA CQI Trained LEAD AUDITOR Quality Management System (QMS)
Similar Profiles
Daniel Abumere AkhigbeDaniel Abumere Akhigbe
Process Engineer | Project Coordinator Assistant at VTT LNG West Africa Ltd.Process Engineer | Project Coordinator Assistant at VTT LNG West Africa Ltd.