Marcus IMAGWE FIMC,CMC,CMS (PhD In View)

Duties: Assist the Project Manager to coordinate and control the engineering tasks relative to the Project.

∙ Assist the Project Manager in his technical relations with Suppliers and Subcontractors. ∙ Organize and coordinate the contract review for the section concerning engineering and issue the corresponding summary document.

∙ Coordinate the delivery of site engineering with the Technical Office.

∙ Coordinate with the Fabrication Project Manager and make sure the engineering issues are in line with the construction activity planning and progress.

∙ Coordinates with the Yard QC Manager regarding the issue of Weld Marks drawings and As Built drawings.

∙ Participate in preparing the project schedule for the engineering section.

∙ Develop, whenever needed, the detailed engineering schedule, within the framework of the general schedule, control its progress and regularly report on it to the Deputy Project Manager.

∙ Issue regularly, based on a frequency to be agreed upon with the Deputy Project Manager but at least on a monthly basis, the progress of the project engineering section, follow-up and forecast changes in the budget and propose any corrective actions necessary.

∙ Ensure supervision of engineering Subcontractors and, in particular, verify that the constructability of the design conforms with the construction requirements, contractual obligations and to the quality assurance provisions.

∙ Meet the contractual technical requirements during the design and development stage of the project, which implies, in particular, the following tasks:

∙ Coordinate reception of drawings and specifications.

∙ Ensure that the design enables optimal profitability of the project.

∙ Carry out a design review.

∙ Analyse Customer documents and request from him, in agreement with the Deputy Project Manager, any possible clarifications or waivers.

∙ Organize and lead engineering design review meetings.

∙ Draw up the engineering documents in line with the construction options selected.

∙ Supervise the drawing up of plot plans, construction drawings, calculation notes, specifications, requisitions, comparisons tables of supplier technical offers and all other technical documents. ∙ Ensure the distribution of engineering documents, with their most recent revisions, to all in-house or outside parties concerned.

∙ Update and regularly issue, at least on a monthly basis, a summary of the quantities remaining to be requisitioned.

∙ Initiate, update or have updated the computerized report "procurement follow-up" for the section concerning him.

∙ Solve, in cooperation with the Project Manager, technical problems that might come up during site engineering.

∙ Manage, in cooperation with the Project Manager, modifications from the customer: ∙ By verifying their impact on cost and execution time for the engineering section:

∙ By making sure that they do not adversely affect final quality and the project overall time frame. ∙ By immediately proposing the appropriate measures.

∙ Verify that the construction methods are neither dangerous nor likely to endanger the health and safety of the personnel or the environment.

∙ Bring to light and resolve with the specialists concerned, all problems that may affect safety, quality, schedule or cost of the project.

∙ Effectively implement the principles and provisions of quality assurance and, in particular, supervise verification and approval of all documents issued under his responsibility.

∙ Participate in drawing up the engineering section of the project completion report, underlining all technical, financial and contractual lessons.

• OF NON DESTRUCTIVE TESTING (NDT) PROJECT: USAN AND ERHA PIPING REPLACEMENT PROJECT
• Duties, provided technical support and advice to the project team with regard to NDT techniques associated with welding processes
• Maintain a constant liaison and dialogue with the client Welding Design and NDT Department to Ensure that NDT techniques and procedures used are compatible with Relevant standards
• Ensure the correct NDE techniques/processes are utilized for each different environment e.g
• Submarines, ships, offshore, factories group etc
• Ensure the safe execution of NDT carried out by client staff and Sub-contractors
• To check and ensure that only suitably calibrated NDT equipment is used
• To perform quality control checking of NDT activities performed on client projects
• To ensure final acceptance of NDT inspections is in accordance with contract specification
• To specify the non-destructive test requirements needed in support of client activities
• To provide level 3 review and support / co-ordinate and control client core work and commercial NDT support requirement to other groups within the company group
• To advise and give guidance to project QA audits as a Technical Competent Officer
• To be the Technical Competent Officer for NDT related issues within the change management process
• Produced and sign-off internal and external procedures within their Level 3 PCN/ASNT qualifications
• Review and keep up-to-date approved and released procedures for both the department and any sub-contractors
• Advise on construction proposals with a view to suitability of welded construction and NDT requirements
• Review suitability of NDT procedures and NDT personnel qualification
• Conducted on-site and off-site audits for both the department and sub-contracts to ensure adherence to approved procedures
• To ensure procedures, quality records and test reports are completed satisfactorily in a timely manner
• Provide specialist technical advice and co-coordinating support to the various projects in a bid to resolve key NDT issues in order that the respective project milestone and key target dates are met
• Ensure examination compliance to the respective NDT specification and acceptance standards in an efficient and effective manner
• Provide specialist technical advice on the feasibility of non-destructive testing disciplines for Exxon
• Mobil fabrications in compliance with the respective Client's Technical Specifications
• Ensure compliance with all Health and Safety working practices and ensure adherence to the respective procedural controls
• To develop, review (and supply) NDT procedures used throughout the site
• To be the point of contact and to maintain close working relationships with all company clients for NDT scopes of work.
• Helped customers complete purchases, locate items and join reward programs.
• Facilitated and logged store opening, closing and shift changes.
• Monitored self-checkout systems and provided help in resolving complex problems.
• Set and updated employee schedules to fulfill gaps based on expected customer demands.
• Oversaw weekly and seasonal merchandising and signage changes to promote specific products.
• Evaluated presentation of checkout lanes and kept team members on top of cleaning tasks when necessary.

• PAUT, TOFD, IR,AE, ET,PT, MT, RT, MFL, MPI, RFI]
• DUTIES: Supervise the QAQC department as a field NDT Engineer and oversee the training and research for PFL in all conventional NDT methods and advanced NDT methods like PAUT, TOFD, AUT, DS1, EDDY CURRENT and Radiography Testing and Radiography film Interpretation
• Coordinate the conduction of various forms of inspections and provide inspection support for clients like Total, Chevron, Addax, Fortress Ghana E&P, Tam Rose (SV Hawkins vessels, Exxon Mobil-USAN FPSO and ERHA) for PFL .

• Ghana) DUTIES:
• Spearheaded the PMI (Positive Material Identification) on offshore structures to ascertain the level of integrity in terms of element deposition in the materials
• Facilitated the verification of quality control activities for third party clients and coordinated all NDT activities on site such as UT, UTS, ET, MPI, VT and PAUT
• Expertly provide technical support to manufacturing management pertinent to compression, pipelines, treating, processing, measurement facilities, inspection and asset integrity management for corrosion control and monitoring.

• Inspected a Gas Lift system using ET, Olympus, GE MENTOR system and PMI on Bolt and piping system, Project: offshore Angola, Cabinda Malongo | PAUT & TOFD on Pressure Vessel for Chevron Project
• DUTIES: Oversaw the corrosion inspection on piping, vessels and Tanks as per API requirements, conducted internal and external inspection to determine the physical condition of various piping u sing Phased array Ultrasonic Testing also calibrating and scanning of PAUT equipment Omni SCAN MX2.

• Actively took part in the engineering of corrosion inspection on piping, vessels and Tanks as per API requirements, conducted internal and external inspection to determine the physical condition of various piping using Phased array Ultrasonic Testing also calibrating and scanning of PAUT equipment Omni - SCAN MX2

• South Africa | Ghana Project ENI DUTIES: Executed NDT demonstration, presentation and procedure qualification
• Facilitated Mock up, Proficiency, competency test for all company technicians and organized training for Basic NDT methods, reviewing PAUT data’s, VT, UT, RTFI, MT, PT and Phased Array level 2 based on the company’s Written Practices
• Skillfully utilized Tom viewer for Client representative on Project
• Tactfully engineered PAUT & TOFD on sphere tank, Pressure Vessel, Heat Exchanger, PAUT on pipe to check lamination & volumetric defect in parent material and fusion area between parent metal and cladding, PT water washable & solvent removable on cladding