Johnbull Jeremiah

• Calibration of Field Instruments and Maintenance according to Project required specification
• Successfully Carried out Official Loop Test With Company
  Modbus Tests
• Dynamic Commissioning / Trouble Shooting /Maintenance of
  Valve Preparation For Leak Test on Pipes in Collaboration with Piping Teams
• Conformity Checks on Various Instruments from Field to ICSS & Vendor Packages
• Loop checks from Field to UCP / Marshaling Cabinets
  Assist Vendors in Package/Skids Commissioning
• Successfully Carried out Troubleshooting/Corrective Action Report on Earth/Grounding Issues on Rio Panels and Vendor Package
• Functionality (I/O) Tests from MCC to ICSS, Stroking / Maintenance On Various PSS & PCS Valves.
• Troubleshooting of process field instrumentation and automation fault logic interlocks
  (intermediate and ESD system)
  Perform of signal simulation and functional loop testing of field instrument with the coordination of
  Boardman on DCS console to obtained and confirmed of those I/O signals.
• Performing of control loop checking, calibration, recalibration, trouble shooting, verification, rectification,
  modification and simulation of various instrumentation and control instruments.
  Testing of fire alarm, smoke detector and heat protector.
  Perform all the jobs, as advised by the team lead and gave daily production reports.
• Fully Involved on the teams for plant shot down restoration, testing and commissioning and start up.
• Energization, SAT, and RFCC Work Down LGP - Main Deck.
• Promote Goal Zero, safety, and quality culture, and drive compliance at the worksite.
• Enforce Chevron HSE policies and procedures at company worksites. Review and provide input on technical specification documents, P&IDs, and other detailed engineering documents for subsea control systems and other interfacing systems.
• Develop and implement commissioning plans for electrical systems. Participate in design reviews, technical workshops, HAZID, HAZOPs, and any other meetings/reviews that may be assigned in the scope of work.
• Interface with existing electrical systems. Safe, timely, and efficient execution, and drive progress of work scope based on the project schedule.
• Develop testing protocols, commissioning and testing procedures, and operations procedures to ensure operational integrity and readiness.
• Ensure compliance with project specifications, industry standards, and safety requirements.
• Maintain and update commissioning documentation, punch lists, and handover packages. Witness site activities, including Site Receipt Inspection, Site integration, Factory Acceptance Test, Extended Factory Acceptance Test, and System Integration Test, and confirm compliance with the approved procedure.
• Work with the contractor to ensure quality issues are properly identified, documented, reported, and timely dispositioned.
• Review and provide input to the Assembly and Testing Procedure, storage and preservation, Transportation Handling Instruction, Installation, and offshore Testing Procedure.
• Supervise testing, pre-commissioning, and commissioning of the subsea systems. Liaise with internal stakeholders, i.e., Quality, HSE, project control, engineering disciplines, planning, Information & Digital Technology, asset & operations, Wells, marine, logistics, planning aviation, subsea intervention, etc. To ensure adequate support for project execution.
• Log and track lessons learned. Review the operation and maintenance manuals, as well as the guidelines issued by the contractor.
• Coordinated with engineers to resolve technical issues during startup. Analyzed data from tests conducted during commissioning phase to ensure proper functioning of systems.
• Maintained accountability for preparation, planning and execution of pre-commissioning and commissioning activities.
• Reviewed engineering drawings to ensure accuracy and completeness of system requirements.
• Provided full technical support during start-up, operation, maintenance.
• Calibrated equipment and systems following standards and codes of practice.
• Performed root cause analysis on system issues to identify solutions to prevent future problems.

• PROJECT: SANHA LEAN GAS CONNECTION (SLGC) FABRICATION YARD, LOBITO, ANGOLA (Onshore)
• CLIENT: CHEVRON.GULF OIL LIMITED, CABINDA, ANGOLA
• ACTIVITIES:
• Performing control loop checking, calibration, troubleshooting, verification, rectification, modification and simulation of various instrumentation and control instruments.
• Testing of fire alarm, smoke detector, and heat protector.
• Perform all the jobs, as advised by the team lead, and give daily production reports.
• Perform wire checking of field instrument to junction box to Rio Panels / Marshalling Cabinets.
• Termination of instrument cables, transmitters, junction box cross-connection on marshalling cabinets
• Field instrument installation based on instrument location plan and piping instrument diagram (P&ID)
• Monitoring of all installed instruments due to functional and matrix testing according to the command of the engineering team in the control room.
• Servicing and calibration of control valves.
• Bench setting of actuators.
• Decoupling of valves and calibration of positioner
• Perform wire checking of field instrument to junction box up to control room.
• Termination of instrument cables, transmitters, junction box cross-connection on marshalling panels.
• Field instrument installation based on instrument location plan and piping instrument diagram (P&ID)
• Monitoring of all installed instrument in air compressor due to functional and matrix testing according to
  the command of engineering team in control room especially the condition of the Compressor
• Calibration and Troubleshooting of valves.
• Termination and installation of vibration probe and proximity in gas compressor motor.
• Performed Insulation resistance Test of Instrument cables, from field instruments to Rio Panels with Meggar Tester
• Successfully Testing of all Vibration Element Booster A&B with TK3 Vibration Tester
• Testing of Temperature Element on Booster compressor A&B with decade Box, Multifunctional Process Calibrator.
• Replacement of all defective instruments, line
  check on all TE’s / VE's on Booster Compressor A and Booster compressor B
• Wire checking and continuity checking from instrument to junction box to Rio Panels, Marshalling Cabinet and ICSS
• On-site validation/calibration of PIT, FIT, LIT, TIT and Values
• Participation in HSE meetings.
• Preparation of daily and weekly progress reports for work done.
• Preparation of daily and weekly work plans.
• Termination of instruments and power cables from instruments, such as transmitters, pressure transmitters, temperature transmitters, flow transmitters, level transmitters, and pressure differential transmitters. Valves; Control valves, shut down (SDV) valves, blow down (BDV) valves, FV valves, and PV valves, Gas directors, Flame detectors, and Smoke detectors to Remote Input/Output Panels (RIO PANELS).
• Termination of Power cables from Electrical and Instrument Building (EIB) Power Panels; LGP-PPL-1102, LGP- PPL-1101, and LGP-PPL-2101E to Rio Panels power line 1 and line 2 respectively.
• Observed worker activities to assess safety compliance and identify enforcement gaps.
• Maintained team-oriented atmosphere with open communication and quick conflict resolution.
• Supervised activities of workers and enforced safety regulations.
• Implemented company policies effectively, maintained high standards of service delivery.
• Provided constructive feedback to staff for improved performance levels.
• Promoted a safe work environment by enforcing strict adherence to safety regulations.

• PROJECT: EGINA FPSO OFFSHORE
• ACTIVITIES:
• Successfully Carried out Maintenance, Troubleshooting, Recalibration and Installation of Various Instruments. EGINA FPSO OFFSHORE
• According to the Project required Specification.
• Loop Testing and Troubleshooting of Living Quarters - AFT MS / All Telephone & PAGA Beacon, Loudspeakers and Override Control Units
• PAGA, Beacon, Loudspeakers and Override Control Units
• PM on Liquid Metering Instruments

• Replacement of Faulty PAGA Devices (Speakers & Beacon lights)
• Troubleshooting and Recalibrating Minox Package Control Valve
• Successful Installation of Lighting on Link Bridge
• Successfully Insulation of Search and Rescue Transponder (SART) on Muster Points, Life Boats, and Radio Room
• Prioritised urgent repair needs, minimising disruption to operations.
• Optimised equipment performance by conducting regular maintenance checks.
• Handled emergency repairs swiftly-kept downtime minimal.
• Ensured safe work environment through diligent inspection and enforcement of safety protocols.
• Developed standard operating procedures; ensured consistent quality across the board.
• Delivered high-quality maintenance service with keen attention to detail.
• Implemented preventative maintenance procedures, reducing frequency of machine breakdowns.

• PROJECT: NIGER DELTA REFINERIES
• ACTIVITIES:
• Installation of field instruments: transmitters (pressure, temperature, level, flow, analyzers), pressure switches, level switches, control valves and solenoid valves in train 1, train 2, train 3, PMS Plant and their various heater units, product tanks, crude storage feed tanks and loading Gantries
• Bench Calibration of instruments before installation: transmitters (pressure, temperature, level, flow, analyzers) pressure switches, level switches, control valves and solenoid valves.
• Online and offline / cold Loop check for all instruments: transmitters (pressure, temperature, level, flow, analyzers), pressure switches, level switches, control valves and solenoid valve in train 1, train 2, train 3, PMS Plant and their various heater units, product tanks, crude storage feed tanks and loading Gantry from device to HMI via PLC and junction boxes where applicable
• Changing control valves fail state (fail open /fail close) in the field and changing of valves positioners
• Tubing installation to instruments where needed according to hook up drawing throughout the plant
• Installation of tubing for heat tracing system using therminol 55 as heating medium from Heatec to all trains and storage tanks where needed.
• Effectively Carried out Maintenance of Various Field Instruments
  Calibration of Field Instruments and Maintenance according to Project required specification
  Successfully Carried out Official Loop Test With Company
  Modbus Tests
• Functionality (I/O) Tests from MCC to ICSS
  Stroking / Maintenance On Various PSS & PCS Valves
• Pre-commissioning/Trouble Shooting/Maintenance of GDIRs
  Valve Preparation For Leak Test on Pipes in Collaboration with Piping Teams
• Conformity Checks on Various Instruments from Field to ICSS & Vendor Packages
• Cold/Hot loop checks from Field to UCP/Marshaling Cabinets
  Assist Vendors in Package/Skids Commissioning
• Successfully Carried out Troubleshooting/Corrective Action Report on Earth/Grounding Issues on
  Vendor Package (Flare & HC Blanket Gas Recovery, Fine Water Filtration, High Integrity Process
  Protection System (P3) and Water Injection Pump Package)
• Successfully Commissioning, Cause and Effect and startup activities of train 2, train 3, loading gantry, crude feed storage tanks and product storage tanks as an instrument personnel
• Carry out preventive and corrective maintenance on all instruments: transmitters (pressure, temperature, level, flow, analyzers), pressure switches, level switches, control valves and solenoid valve in train one, train two, train 3 and their various heater units, product tanks, crude storage feed tanks and loading Gantry
• Performing control loop checking, calibration, recalibration, troubleshooting, verification, rectification, modification and simulation of various instrumentation and control instruments.
• Testing of fire alarm, smoke detector, and heat protector.
• Perform all the jobs, as advised by the team lead, and give daily production reports.
• Perform wire checking of field instrument to junction box to Rio Panels and to ICSS
• Termination of instrument cables, transmitters, junction box cross-connection on marshalling panels.
• Field instrument installation based on instrument location plan and piping instrument diagram (P&ID)
• Monitoring of all installed instruments in Heat Exchanger and Nitrogen Package due to functional and matrix testing according to the command of the engineering team in control, especially the condition of the heater.
• Servicing and calibration of control valves.
• Bench setting of actuators.
• De coupling of valves and calibration of positioner
• Servicing of SOVs, boosters, filters, regulators, and other accessories in the control valves.
• Calibration and stroking of control valves such as Fisher, Samson.
• Termination and installation of flow switch, pressure switch, and level switch on heat exchanger and truck loading area.
• Termination and installation of vibration probe in gas compressor.
• Wire checking and continuity checking from instrument junction box to control panel.
• Preparation of daily and weekly progress reports for work done.
• Preparation of daily and weekly work plan.
• Auditing of electrical/instruments installation work.
• Kept detailed records of all maintenance activities to track equipment lifespan and repair needs.
• Streamlined workflow for increased productivity by implementing effective maintenance schedules.
• Resolved complex technical issues for smooth operation of machinery.
• Directed major repair projects to successful completion without compromising on safety standards.
• Maintained an orderly work area, promoting a safe and efficient workspace.
• Conducted staff training to improve skill set and ensure quality workmanship.
• Prioritized urgent repair needs, minimizing disruption to operations.
• Optimized equipment performance by conducting regular maintenance checks.
• Implemented preventative maintenance procedures, reducing frequency of machine breakdowns.

• Streamlined communication between team members, improving overall productivity.
• Maintained a clean workspace adhering to health and safety standards; this resulted in fewer accidents at the site.
• Applied vast knowledge of electrical systems for swift problem-solving.
• Maximized efficiency levels with effective workforce management skills.
• Experiences for managing commissioning execution and performing OTPs of all electrical facility such as UPS, normal and emergency power distribution, subsea cable and umbilical and transformers.
• Experienced in commissioning high voltage systems such as VSR and subsea power cable.
• Familiar with LOTO procedures and electrical codes and standards.
• Experience of handling EPC contractors, sub-contractors and vendors.
• Application and in-depth knowledge of stakeholder specifications and a working knowledge of Industry standards.
• Conversant with ATEX/IEC regulations.
• Experience in start-up support to Operation.
• Experience in an offshore environment is a plus. Excellent interpersonal and communication skills with a focus on teamwork and the ability to communicate and interact.
• Ensuring HSE procedures required for each activity and work phases are available and applied.
• Contributing to Safety Walkdowns. In case of incidents and contributions to investigations.
• Participating in Pre Start-up Safety Reviews (PSSR).
• Issue Pre-Comm, Comm and Start-up progress reports.
• Managing Pre-Comm, Comm, Start-up & Operation activities, coordinating different parties.
• Ensuring respect for schedule and budget, either during home office activity or at site.
• Participating in risk and opportunity meetings.
• Responsible for competency assurance and development of team.
• Supervised electrical installation and maintenance for FPSO operations.
• Developed troubleshooting protocols for resolving electrical system failures. Provided empowering leadership to ensure positive production outcomes and consistent team morale.
• Supervised a team of electricians in performance of daily tasks related to project completion.
• Kept team members and worksites in compliance with safety standards. Conducted electrical inspections, ensuring compliance with applicable codes and regulations.
• Supervised electrical installation and maintenance activities on offshore facilities.
• Performed with efficiency and quality while installing and repairing electrical projects.
• Performed quality assurance checks on completed installations prior to commissioning.

• ACTIVITIES:
• Calibration of field instrument, online and offline calibration, transmitter, PSV, Pressure and Temperature gauges.
• Tubing installations from transmitter to valves.
• Involved in pre-commissioning
• Loop check on field instruments
• Successfully delivered on tasks within tight deadlines.
• Delegated tasks appropriately, achieved balanced workload among team members.
• Successfully Installation and commissioning of PAGA, Beacon, Loudspeakers and Override Control Units.
• Functional Test Gas Detectors
  6M & 3M Pressure Switches

• PROJECT: EGINA FPSO INTEGRATION PROJECT, NIGERIA.
• CLIENT: TOTAL UPSTREAM NIGERIA LIMITED.
• ACTIVITIES:
• Coordinated closely with wider team members for successful completion of tasks within deadlines.
• Conducted comprehensive risk assessments prior to every task; promoted safer work practices in the organisation.
• Facilitated smoother project execution by effectively liaising with engineers and other technicians.
• Pre commissioning Check (PRC) of the instrument to ensure proper installation and Accessibility.
• Continuity test of the cables from instruments to junction boxes, junction box to marshaling cabinets, marshaling cabinets to system cabinets and finally to ICSS or HM1 to ensure that all cables are connected to their designated instruments.
• Installation and commissioning of Gas Detectors, Flame Detectors and Smoke Detectors.
• Pre-commissioning activities as well as the trouble shooting with the help of trouble shooting loop diagram (TSLD) as the case may be.
• Experience of using test equipment such as pressure calibrators, HART Communicator, RTD, Auto pump loop calibrator etc.
• Experience in interpretation of all Engineering document including datasheet, P& IDs, cause and effect diagram and loop drawing etc.
• Ensure that the instrument and controls content of the dossiers is accurate and completed before they are accepted from construction and before they are submitted to operation unit.
• Operational test procedure (OTP) to ensure proper and complete operation of the equipment and instruments on each package before final start-up
• Involved in pre-commission / Commissioning instruments, process control systems, including safety system and PLC system on mechanical package units, valve leak test to ensure zero leakage on all process lines.
• Loop check on instruments such as, Temperature transmitters, Pressure transmitters, Flow transmitters (FT, AUTRASONIC, FLUENTA, OR KRONE), Pressure differential transmitters (PDT) to confirm their functionalities.
• Zero trimming and Re-arrangement of the official given value of the transmitters as per specification for the official loop test.
• Calibration of instrument valves such as Blow Down Valves (BDV), Emergency Shutdown Valves (ESDV) Control Valves (Positioner TY), ON & OFF Valves (Fail open or Fail close) Pressure Safety Valves (PSV).
• Clear Understating and Operating of Integrated Control and Safety System (ICSS, HMI) for process and control
• Hands on testing of all kinds of field instrument devices including Temperature, Flow, Level and Pressure Transmitters

• PROJECT: ESCRAVOS GAS TO LIQUIDS (EGTL), NIGERIA
• CLIENT: CHEVRON NIGERIA LIMITED
• ACTIVITIES:
• Handle responsibility of maintaining all instrument devices/equipment within the plant.
• Preventive Maintenance on various F&G Devices (smoke detector, gas detectors, flame detectors & open path detectors)
  Integrity checks on various valves (25, 50, 75 & 100% stroking)
• Preventive Maintenance on gas turbine generators
• Replacement of faulty PAGA Devices (Beacon lights & Speakers)
• Preventive Maintenance on Fire Water Pump Jockey Pumps, Fire Water Pumps Instruments
• Preventive Maintenance on steam tracing tubing system on train 1 train 2 and down side.
• Preventive Maintenance on all F&G Devices in Fire Water Pump units
• Replacement /Maintenance of faulty Devices.
• Instrumentation Preventive Maintenance for Centralized C02 System
• Trouble Shooting / Maintenance of all malfunctioning field instrument devices.
• Streamlined operations by implementing effective troubleshooting techniques.
• Conducted diagnostic tests for identifying faults and malfunctioning instrument device.
• Executed preventative maintenance on key machines, reduced downtime significantly.
• Maintained a clean working environment, upheld compliance with health and safety regulations.
• Conducted comprehensive risk assessments prior to every task; promoted safer work practices in the organisation.
• Troubleshot and resolved technical issues to restore functionality.
• Followed preventive maintenance schedule and updated documentation to show completed work.

• CLIENT: CHEVRON NIGERIA LIMITED (CNL).
• PROJECT: ESCRAVOS GAS TO LIQUIDS (EGTL)
• Installation/Construction of Instrumentation And Control Quantities of Pre-commissioning, Commissioning and Start-up.
• Completion of Instrumentation & Control scope of the EGTL1 Project.
• Analyze Instrumentation requirements and other critical items to determine the best work method.
• Ensure instrumentation operations were carried out in accordance with company, client and agency health, safety & environmental policies and regulations.
• Handle the responsibilities of Tubing installation, Tubing hook up for all instruments field device,
• Determine corrective actions needed in order to meet project objectives and work to have these implemented.
• Report progress, performance, initiatives, issues, and challenges to Project Lead.
• Calibration/simulation of instruments smart devices transmitters and valves stroking
• Involved in Pre-commission / Commissioning instruments, process control systems, including safety system and PLC.
• Fully Involved in plant start-up

• PROJECT: ESCRAVOS GAS TO LIQUIDS (EGTL) CONSTRUCTION OF GAS TO LIQUIDS FACILITIES IN ESCRAVOS NIGERIA.
• CLIENT: CHEVRON NIGERIA LIMITED (CNL)
• ACTIVITIES;
• Responsible for all instrumentation work/activities to ensure the project standard and specification are followed.
• Provided technical support to maintenance and operations department.
• Documented engineering project, specifications and procedures for electrical and instrumentation projects.
• Punch cleaning and instrument modification.
• Loop check testing & commissioning activities.
• Preparation of Job Safety Analysis (JSA) and method statements (permit to work) for nature of the job to be performed.
• Handled the responsibilities of all instrument punch clearing items.
• Calibration of field instruments like transmitters, control valves, PSV solenoid valves and pressure switch etc...
• Handled the responsibilities of Installation of field instruments, main and secondary cable tray
• Cables laying and cable termination of instruments.
• Installation of hook up Air tubing, Impulse tubing & analyzer tubing and their various supports.
• Assigned the tasks of maintaining the standards and specifications of instrument and control systems
• Analyzed maps, reports, tests, drawings and data for planning and designing systems
• Installation and commissioning of different type of fire and gas detectors and PAGA system.
• Responsible for troubleshooting and repairing equipment
• Installed complex instrumentation systems to enhance operational capacity.
• Facilitated training sessions, contributing to team skill enhancement.
• Maintained rigorous health and safety practices for a safer work environment.
• Adhered strictly to regulatory compliance whilst carrying out installation procedures.
• Supported installation, operation and maintenance of electronic systems.
• Interpretation of P&ID, Line diagram, schematic drawing and review of location, hook- up, Loop drawing, ISO and other engineering drawings.
• Responsible for reviewing new material vendor manual for proper installation and compliance with projects standard and specification.
• Maintained and modified existing systems
• Worked collaboratively with operation engineers, design Engineers purchasers and other internal staff for completing multiple projects
• Installation, calibration and loop checking of the field instruments (Emerson Rosemount, ABB, & Yokogawa)
• Technical Support for the instrumentation team

• ACTIVITIES;
• Experiences for managing commissioning execution and performing OTPs of all electrical facility such as UPS, normal and emergency power distribution, subsea cable and umbilical and transformers.
• Experienced in commissioning high voltage systems such as VSR and subsea power cable. Familiar with LOTO procedures and electrical codes and standards. Experience of handling EPC contractors, sub-contractors and vendors.
• Application and in-depth knowledge of stakeholder specifications and a working knowledge of Industry standards.
• Conversant with ATEX/IEC regulations.
• Experience in start-up support to Operation.
• Experience in an offshore environment is a plus. Excellent interpersonal and communication skills with a focus on teamwork and the ability to communicate and interact. • Ensuring HSE procedures required for each activity and work phases are available and applied.
• Contributing to Safety Walkdowns. In case of incidents and contributions to investigations.
• Participating in Pre Start-up Safety Reviews (PSSR).
• Issue Pre-Comm, Comm and Start-up progress reports.
• Managing Pre-Comm, Comm, Start-up & Operation activities, coordinating different parties.
• Ensuring respect for schedule and budget, either during home office activity or at site.
• Participating in risk and opportunity meetings.
• Responsible for competency assurance and development of team.
• Supervised electrical installation and maintenance for FPSO operations.
• Developed troubleshooting protocols for resolving electrical system failures. Provided empowering leadership to ensure positive production outcomes and consistent team morale.
• Supervised a team of electricians in performance of daily tasks related to project completion.
• Kept team members and worksites in compliance with safety standards. Conducted electrical inspections, ensuring compliance with applicable codes and regulations.
• Supervised electrical installation and maintenance activities on offshore facilities.
• Performed with efficiency and quality while installing and repairing electrical projects.
• Performed quality assurance checks on completed installations prior to commissioning.
• Identified necessary repairs quickly through thorough inspection procedures thus reducing potential hazards.
• Streamlined communication between team members, improving overall productivity.

• Reviewing all commissioning Operational acceptance documents.

• Developing deliverables & responsibility matrix. Walkdowns. In case of incidents and contributions to investigations.

• Coordinated with other supervisors to maintain consistency across shifts.
• Performing testing and commissioning of control valves with the coordination of the Boardman on DCS
• Console to obtained and confirmed of those I/O signals.
  Involves in trouble shooting of process field instrumentation and automation fault logic interlocks
  (intermediate and ESD system)
• Perform of signal simulation and functional loop testing of field instrument with the coordination of Boardman on DCS console to obtained and confirmed of those I/O signals.
• Involves on the teams for plant shot down restoration, testing and commissioning and start up.
• Implemented company policies effectively, maintained high standards of service delivery.
• Supervised activities of workers and enforced safety regulation
• Participating in Pre Start-up Safety Reviews (PSSR).
• Issue Pre-Comm, Comm and Start-up progress reports.
• Managing Pre-Comm, Comm, Start-up & Operation activities, coordinating different parties.
• Ensuring respect for schedule and budget, either during home office activity or at site.
• Responsible for competency assurance and development of team. Managed commissioning processes for offshore facilities ensuring operational readiness.
• Provided technical support during start-up phases of new equipment installations.
• Ensured adherence to SHELL's safety policies throughout commissioning operations on-site. Provided technical support during start-up, testing, troubleshooting, and commissioning activities. •
• Developed pre-functional checklists, functional testing procedures and actual functional testing as part of commissioning process.

• Provided technical guidance to junior electricians which enhanced their practical understanding of complex circuits.
• Streamlined communication between team members, improving overall productivity.
• Ensured efficient workflow for improved project timelines by assigning daily tasks to electricians.
• Utilised CAD software for designing and modifying electrical layouts, resulting in accurate planning and implementation.
• Leads in sub system Commissioning Execution Plan and Strategy. Supervising all Electrical sub- Contractor's, vendor and OEM on commissioning activities in ensuring adherence to the commissioning methodology and proper use of the system database.
• Managing Sub-contractor, vendors and OEM in Inspection, Construction. Installations Commissioning and Start Up (Csu), Operation and Maintenance in Power Systems Such as Hv, Mv, Lv Power, transformer, Switchgear, auxiliaries Systems, and Motors. • • Responsible for Project commissioning deliverables & responsibility matrix. • Led troubleshooting efforts for electrical systems to minimize downtime. • Supervised electrical maintenance and installation projects for oil and gas operations. • Coordinated safety protocols to ensure compliance with industry regulations. Promoted safety and work site awareness by identifying and removing potential hazards and effectively training team members in safety protocols. • Oversaw master project scheduling, as well as plans for specific materials and work assignments required to complete each job. • • Kept team members and worksites in compliance with safety standards.

• Managing the Company Business Effectively and Efficiently.
• Communicate with Clients on Contracts and Construction
  Providing quality utility services to company clients
• Ability to motivate other staffs to work as a team
• Enforced adherence to company policies and industry regulations during all maintenance activities.
• Cut down unnecessary expenses by optimizing resource usage.
  Scheduled regular machine servicing to ensure uninterrupted function.
• Conducted risk assessments for safer work environment.
• Managed team for efficient resolution of facility issues.
  Improved equipment efficiency by implementing preventative maintenance procedures.
• Enhanced safety standards with regular inspections and necessary repairs.
• Cut down unnecessary expenses by optimising resource usage.
• Monitored maintenance priorities and allocated labour resources to meet expected demands.
• Maintained daily facility operations with strong focus on preventive maintenance and swift repairs.

• Successfully installation and commissioning of 2 Glo world mast in Ikorodu and Imota, Lagos
• Effectively Carried out Maintenance of Various Field Telecom installations
• Successfully installation of PAGA, Beacon, Loudspeakers and Control Units at NavGas LPG Terminal, Apapa, Lagos.
• Preventive Maintenance on different telecom facility.
• successfully Re-installation and commissioning of Fire & Gas Alarm System, NavGas LPG Terminal
• Directed major repair projects to successful completion without compromising on safety standards.
• Developed standard operating procedures; ensured consistent quality across the board.
• Liaised effectively with management about equipment status, contributing to informed decision making processes.
• Minimized downtime by promptly addressing any technical issues or breakdowns.
• Instituted cost-effective solutions, saving resources without compromising on quality or efficiency.