Gospel Abutu

Similar Profiles

• G JagadeeshG Jagadeesh

  <ul> <li>Responsibilities -Process Engineering: -</li> <li>Responsible for making SOP on required process flow for overall manufacturing.</li> <li>Responsible for doing validation and closing buy off points in line before starting an NPI.</li> <li>Making process mapping for on scrap and process issues to increase productivity in manufacturing.</li> <li>Responsible for doing analysis and making actions against failure to reduce production loss.</li> <li>Achieving standard targets requirement from customer end related to yield and scrap.</li> <li>Responsible for confirming QOC and OBA failures and as well as making analysis on that and sharing RCA (Root Cause and Analysis) to CFT (Cross Functional Team).</li> <li>Conducting MOM (Minutes of Meeting) on daily basis Among the Yield, Scrap and Production.</li> <li>Responsible for preparing PFMEA on process stages inline.</li> <li>Making a SWR (Special Work Request) for any process change to improve yield and productivity.</li> <li>Responsible for making reports based on analysis with PPT, and conducting CFT to present reports for failure reduction.</li> <li>Maintaining good yield graphs toward the given targets.</li> <li>Time study, standard time and manpower request, capacity analysis, and line balancing analysis.</li> <li>Preparing DFMA reports of manufacturing and assembly based on criticality. Process improvement activities and continuous improvement of the manufacturing process, material handling, and line layout.</li> <li>Organizing and executing all process activities, such as rejection and scrap reduction.</li> </ul> at Sunny Opotech India Pvt.Ltd<ul> <li>Responsibilities -Process Engineering: -</li> <li>Responsible for making SOP on required process flow for overall manufacturing.</li> <li>Responsible for doing validation and closing buy off points in line before starting an NPI.</li> <li>Making process mapping for on scrap and process issues to increase productivity in manufacturing.</li> <li>Responsible for doing analysis and making actions against failure to reduce production loss.</li> <li>Achieving standard targets requirement from customer end related to yield and scrap.</li> <li>Responsible for confirming QOC and OBA failures and as well as making analysis on that and sharing RCA (Root Cause and Analysis) to CFT (Cross Functional Team).</li> <li>Conducting MOM (Minutes of Meeting) on daily basis Among the Yield, Scrap and Production.</li> <li>Responsible for preparing PFMEA on process stages inline.</li> <li>Making a SWR (Special Work Request) for any process change to improve yield and productivity.</li> <li>Responsible for making reports based on analysis with PPT, and conducting CFT to present reports for failure reduction.</li> <li>Maintaining good yield graphs toward the given targets.</li> <li>Time study, standard time and manpower request, capacity analysis, and line balancing analysis.</li> <li>Preparing DFMA reports of manufacturing and assembly based on criticality. Process improvement activities and continuous improvement of the manufacturing process, material handling, and line layout.</li> <li>Organizing and executing all process activities, such as rejection and scrap reduction.</li> </ul> at Sunny Opotech India Pvt.Ltd

• Jeffrey StilesJeffrey Stiles

  <ul><li>Company Overview: Loggerhead is a premier Florida property insurer that offers a user-friendly process, transparent claim handling, and prompt solutions for policyholders, creating a world-class customer experience.</li><li>Responsible for creating, directing, and managing the Customer Service, Internal Sales, and Agency Support functions for a new Homeowners' Insurance Company in Florida by overseeing the short and long-term strategies of the organization's customer success journey. This may include, but is not limited to, providing strategic recommendations regarding concepts and routines that drive efficiency and empower employees.</li><li>Work closely with the CEO and COO on all aspects of delivering service to customers and agents.</li><li>Provide strategic oversight and guidance to the operational leadership team.</li><li>Work closely with other department heads to support projects or procedures that have a direct impact on customers.</li><li>Responsible for the selection and implementation of the CSAT platform as well as the Customer Relationship Management (CRM) software currently in use with the organization.</li><li>Responsible for building out all operational teams, including job development, standard operating procedures, quality management, and the like.</li><li>Work in an integrated fashion with third-party vendors to provide "world-class" customer service to Policyholders, Agents, and other customers both in and out of inbound and outbound settings.</li><li>Collaborate with business units throughout the organization to design, develop, and implement consumer-focused business practices, procedures, and Corporate Policies.</li></ul> at Loggerhead Reciprocal Interinsurance Exchange<ul><li>Company Overview: Loggerhead is a premier Florida property insurer that offers a user-friendly process, transparent claim handling, and prompt solutions for policyholders, creating a world-class customer experience.</li><li>Responsible for creating, directing, and managing the Customer Service, Internal Sales, and Agency Support functions for a new Homeowners' Insurance Company in Florida by overseeing the short and long-term strategies of the organization's customer success journey. This may include, but is not limited to, providing strategic recommendations regarding concepts and routines that drive efficiency and empower employees.</li><li>Work closely with the CEO and COO on all aspects of delivering service to customers and agents.</li><li>Provide strategic oversight and guidance to the operational leadership team.</li><li>Work closely with other department heads to support projects or procedures that have a direct impact on customers.</li><li>Responsible for the selection and implementation of the CSAT platform as well as the Customer Relationship Management (CRM) software currently in use with the organization.</li><li>Responsible for building out all operational teams, including job development, standard operating procedures, quality management, and the like.</li><li>Work in an integrated fashion with third-party vendors to provide "world-class" customer service to Policyholders, Agents, and other customers both in and out of inbound and outbound settings.</li><li>Collaborate with business units throughout the organization to design, develop, and implement consumer-focused business practices, procedures, and Corporate Policies.</li></ul> at Loggerhead Reciprocal Interinsurance Exchange

• Rohit RathorRohit Rathor

  <ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group

• Peter NghePeter Nghe

  <ul><li>Lead a high performing team of Case Managers, Injury Management Advisor and Technical Specialist. Acting as a Third Party Administrator and responsible for the management of the portfolio of Youi CTP Claims.</li><li>My role was to oversee and supervise the day to day operation of the claims team and to ensure that both our Statutory Benefits and Common Law claims portfolio are being managed at a high level and in line with the legislation.</li><li>I am responsible for design and implementation of framework for effective claims strategies to uplift Customer Experience including Business and Regulator deliverables.</li><li>Established and developed strong working relationships with our client Youi to ensure that regular business performance updates are provided, improve reporting and claims governance including risk oversight are being identified.</li><li>Develop new initiatives and ideas to assist with the continuous improvement of claims processes and procedure including the rolling out of such plan to the business.</li></ul> at Employers Mutual Limited<ul><li>Lead a high performing team of Case Managers, Injury Management Advisor and Technical Specialist. Acting as a Third Party Administrator and responsible for the management of the portfolio of Youi CTP Claims.</li><li>My role was to oversee and supervise the day to day operation of the claims team and to ensure that both our Statutory Benefits and Common Law claims portfolio are being managed at a high level and in line with the legislation.</li><li>I am responsible for design and implementation of framework for effective claims strategies to uplift Customer Experience including Business and Regulator deliverables.</li><li>Established and developed strong working relationships with our client Youi to ensure that regular business performance updates are provided, improve reporting and claims governance including risk oversight are being identified.</li><li>Develop new initiatives and ideas to assist with the continuous improvement of claims processes and procedure including the rolling out of such plan to the business.</li></ul> at Employers Mutual Limited