CHINWI AFORJI OSARO

• Key Roles Held

· POAR – AMD1 & AMD2 JV-Inagha (SEWOP) Coil Tubing Simultaneous Operations (2025 till date)

· Panel Operator Support (2023 till date)

· POAR (Production Operating Authority Representative) – IKIKE Project / Production Simultaneous Operations (SIMOPs) on OML99; High Pressure, Medium Pressure and Test Headers Replacement Project / Production Simultaneous Operations on AMD1&2 and AMP1; and AMD2 Coil Tubing / Production Simultaneous Operations (2021 – 2022)

· Reporting Officer – OLM99 production and injection data analysis and reporting (2021 – date)

· Participated in OML99 partial field shutdown during IKIKE hook-up and headers tie-in operations.

· Monitored hot work activities on AMD1&2 piping and structures during IKIKE and headers project SIMOPS.

· Participated in testing and commissioning during the IKIKE and headers project SIMOPS.

· Acted as POAR during Baltic drilling, coil tubing, and well workover SIMOPS on AMD1&2 wellhead platforms.

· Participated in IKIKE startup procedure review (Operational Test Procedure) at SAIPEM yard.

· Participated in equipment preparation for non-shutdown intrusive inspection of heat exchangers and separators, as well as monitoring and reinstatement after inspection.

· Pioneered in the survey and installation of wireless transmitters on wells annuli on AMD1&2.

· Produced a hand-drawn P&ID of AMD1&2 chemical injection system, (P&ID was reviewed, validated and adopted as master P&ID used on site).

· Participated regularly in preparation, plant shutdown, and startup for rig arrival or rig move.

· Monitor and operate safely and efficiently all production process equipment associated with oil/gas production.

· Carry out analysis of oil and gas production shortfalls and prepare Amenam and Ikike daily production and injection reports.

· Carry out periodic well valve safety and integrity tests and update on Peloton.

· Prepare equipment for routine maintenance, and wells for well service intervention activities.

· Carry out supervision on maintenance/intervention jobs on process or powered systems to ensure compliance with safety requirements as indicated in the permit to work.

· Perform first-level maintenance on instrumentation, mechanical, electrical, and other production equipment.

· Carry out daily validation of work permits and toolbox talks prior to the start of jobs in assigned areas.

• Carry out routine checks on process and utility facilities.
• Carry out safety valve integrity tests to ensure safety KPIs are met.
• Prepare equipment for routine maintenance and wells for well-service intervention activities.
• Collect and record operating parameters and production figures.
• Follow up on maintenance/intervention jobs on process or powered systems to ensure compliance with safety requirements as indicated in the permit to work.
• Carry out first-level maintenance on instrumentation, mechanical, electrical, and other production equipment.
• Carry out toolbox talk and work permit site validation.
• Keep the site tidy and clean.

• Achievements and General Responsibilities:
• Planning and coordinating equipment leasing services, and ensuring better customer service delivery.
• Performed monthly periodic maintenance on concrete mixer, diesel generators, 7ton truck engine.
• Carried out major repairs on concrete mixer, compactor, and engines.
• Purchase, sales, and supply of spare parts.
• Supervision of third-party maintenance operations.
• Plan and coordinate haulage and transportation services.

• Prepared hydrostatic desalter for intrusive inspection on FPSO Akpo.
• Supported weekly offloading preparation on Fpso Akpo.
• Carried out FPSO ballasting and deballasting operations using standard procedures.
• Performed methanol injection preservation for subsea wells and risers.
• Conducted routine pigging for pipeline integrity with dead oil recirculation.
• Tested safety valves and pressure-tested process vessels after intervention.
• Visited satellite platforms for preventive maintenance via boat transfer on Odudu.
• Executed planned equipment start-up and shutdown activities safely.
• Completed first-level maintenance on instrumentation, mechanical, electrical, and production equipment.
• Recorded and reported daily production data with accuracy.
• Set up test separator alignment for routine well testing operations.

• Repair the petroleum products transfer pump at the Port Harcourt area office.
• Perform periodic maintenance on the diesel electric generator.
• Grease valves during routine equipment servicing.
• Handle memos for equipment maintenance requests, repairs, and purchasing.
• Prepare materials pre-mob for pipeline repairs.
• Assist welders and fitters during pipeline repair works.

• Achievements and General Responsibilities:
• Participated in turnaround maintenance on a deep-sea dredger at JaPaul PLC, marine base.
• Participated in repairs and replacement of damaged pumps and valves.
• Participated in flange management activities.
• Participated in light and major repairs on generators and the Mak dredging engine.
• Participated in the start-up and test run of dredging pump engines.
• Perform pipe cutting operations with a tubing cutter for hydraulic pipe replacements.
• Participate in tank evacuation and cleaning operations.