BEREPIKI FUBARA EMMANUEL

MAINTENANCE OF FLOATING, PRODUCING, STORAGE AND OFFLOADING FACILITY.

• Workforce management and job co ordinations.
• Maintenance of low, medium and high-pressure compressors and water/ gas injection pumps.
• Electronic Permit to Work Preparation.
• System Application and Programme (SAP) operations used for materials tracking, time writing, notification creations/ work order management etc.
• Transmitter Calibration, replacement and maintenance (Pressure, level, temperature, DP) using HART and TREX device communicators.
• Tank entry for equipment inspections and maintenance.
• Maintenance and repair of final control elements, pressure/ flow/ temperature control valves.
• Maintenance of vibration/ speed probes and vibration monitoring system (BENTLY NEVADA 3500/3300).
• Installation and maintenance of fire and gas protection equipment. (Open paths gas detector, Infrared red/ ultraviolet flame detectors, Smoke and heat detectors, thermosensible cables etc.
• Circuit Troubleshooting and loop test using mA loop communicator and digital multimeter with knowledge in analog and digital signal.
• Maintenance of process instrument equipment and fire and gas equipment in a Rolls Royce Turbine generator and power generators.
• Maintenance of Pneumatic and hydraulic Control Panels. (Emergency Blow Down Valves, Emergency Shut Down Valves, Shut Down Valves, Remote Operated Valves etc.).
• Maintenance of fire and gas protection systems. (Deluge, CO2 protection systems).
• Replacement of temperature element on Flare tip (134 mtrs).
• Oil and gas Process facility start-up with knowledge in oil and gas process systems.
• Installation and Maintenance of Pressure Vacuum Safety Valve (PVSV).
• Operation/ use of Mobile Elevating Work Platform (MEWP).
• Maintenance smart positioners and vessel inclinometers.
• Swagelok Pneumatic tube bending.
• Maintenance of High Integrity Pressure Protection System (HIPPS).
• Use of instrument calibration hand held devices (mA loop and pressure calibrators, pressure simulators, etc)
• Use of emergency breathing apparatus during chemical handling activities
• Rope access maneuvers. (Working at height).
• Emergency response/ fire-fighting support.

• MAINTENANCE OF FLOATING, PRODUCING, STORAGE AND OFFLOADING FACILITY.
• Preventive maintenance on Low Pressure, Medium Pressure & High-Pressure Gas compressors.
• Transmitter Calibration and maintenance
• Tank entry & cleaning / Vessel Inspections & Maintenance.
• Installation & maintenance of Vibration sensor / probes (BENTLY NEVADA 3500/3300)
• Maintenance of all fire and gas protection equipment. (Open paths gas detector, Infrared red gas detector, Smoke Detectors, infrared red/ ultraviolet flame detector, Thermosensible cables etc.)
• Maintenance of instrumentation equipment, fire and gas equipment on Turbine generators
• Maintenance of Pneumatic/ Hydraulic Control Panels. (EBDV, ESDV, SDV, ROV, etc.)
• Maintenance and replacement of Thermosensible cables.

TOTAL PRODUCING NIGERIA LIMITED (Amenan Kpono OML 99)

• Preventive maintenance on LP, MP & HP Gas compressors.
• Maintenance of Hydraulic well head control Panels
• Transmitter Calibration and maintenance
• Maintenance of Pneumatic Control Panels. (Shut down/ blow down valves.

NIGERIAN AGIP OIL COMPANY (OB/OB GAS PLANT OBIRIKUM).

• Upgrade of two Turboexpander Compressor
• Replacement of two 7200 BENTLY NEVADA, vibration monitoring system with a 3500 BENTLY NEVADA with a display screen.
• Replacement proximate Junction boxes
• Replacement of eight radial proximate probes and two speed probes alongside their extension cables.
• Adjusted the gap voltage of the probes and configured to the control room.
• Laid two signal armour cables of 2.5mm 5 core flexible cables (450 meters each) from machine skid to control room.

CAWTHORNE CHANNEL GAS PLANT (Cryogenic Gas plant)

• Maintenance of Cryogenic Gas Refining Plant
• Calibration of transmitters (pressure, flow, temperature etc.) using HART communicator 475.
• Calibration and Maintenance of pressure gauges, air regulators and pneumatic lines.
• Maintenance of HVAC system, lighting panel, air compressors & air driers
• Maintenance of Motor Control Center (MCC)
• Calibration & Maintenance of valves (PSV, ESDV, PCV etc.)
• Maintenance of Power generating gas turbines (SOLAR TURBINE), PLC, Gas compressors via Engine Supervisory Control System etc.
• Maintenance of 24volts UPS battery systems, turbine Back- up Batteries etc.
• Maintenance of AFP-200 Fire protection & alarm panels.
• Preventive maintenance of accommodation utility area.

ATLANTIC BLUE WATERS LTD FOR INDORAMA PETROCHEMICAL COMPANY LIMITED.

• Polypropylene Plant (P.E Plant) Simplex Fire & Gas Protection System
• Servicing of Deluge Valves
• Servicing of pneumatic Actuators in Teal Area
• Servicing & reconditioning of smoke detectors and boundary call points
• Installation of Stations calibration of Pressure switches in Teal Area
• Functionality and loop checks on all fire protection devices.

FOR INDORAMA PETROCHEMICAL COMPANY LIMITED

• Polyethylene Plant (P.E. plant) Simplex Fire & Gas Protection System
• Maintenance of Pressuage Fire protection system.
• Installation of smoke and heat detectors
• Servicing of deluge valves & sprinkler valves
• Change of deluge gaskets & diaphragms
• Calibration of pressure switches

YOMATECH NIGERIA LIMITED FOR ELF/TOTAL PETROLEUM NIGERIA LTD. AMENAM KPONO (OML 99)

• Amenam Kpono Oil & Gas Injections wells Hook-up
• Installation of temperature transmitters.
• Installation of flow transmitters.
• Installation of flow line flow valves.
• Installation of heat Tracing cables & junction boxes.
• Calibration & installation of pressure Transmitters & gauges.
• Installation of (SCSSV) Surface Controlled Subsurface Safety Valves
• Installation of (SSV) Surface Safety Valves
• Commissioning of oil/ gas/ water injection wells

MOBIL PRODUCING NIGERIA UNLIMITED

• INSTALLATION OF ENRAF 854 Automatic Tank Gauging System
• Installation & Calibration of ENRAF 854 ATG (Automatic Tank Gauging System on a crude Storage tank
• Installation of a dry capacitance Alarm scout, used in the monitoring of high & low level of crude oil On a crude oil storage tank.
• Configuration of pan alarm panel in the Central Control Room (CCR)
• Configuration of HMI (Human Machine Interface) panel.

DIETMANN NIGERIA LIMITED FOR SHELL GAS PLANT (OYIGBO NORTH, ALL GAS GATHERING (AGG) PROJECT.)

• Calibration of Glycol Reboiler
• Calibration of pressure transmitters
• Installation of Reciprocating Pump
• Calibration & installation of pressure gauges.
• Installation of Emergency Shutdown Valves (ESDV)

FIRST ALUMINIUM COMPANY NIGERIA LTD

• Installation of GAS FLOW METER
• Installation of Pressure Transmitters
• Installation of Temperature Transmitters
• Installation of Flow Transmitters
• Installation of Pressure Gauges
• CONSTRUCTION & INSTALLATION OF AN AUTOMATIC CHANGE-OVER & LOAD TRANSFER PANEL FOR A 250KVA POWER GENERATING SET / NATIONAL GRID AT MATER MISCERACODIAE CATHOLIC CHURCH, RUMUOMASI RIVERS STATE.